[求助]如何用命令行的方式运行已建好的Numeca的计算模型文件

jasonf

如何在dos模式中用命令行的方式运行已建好的Numeca的计算模型文件，相关文件的后缀名是否为.run?

jasonf

主要是想让其他软件能自动调用Numeca进行流场计算
请各位高手指点

qazxsw

[这个贴子最后由qazxsw在 2003/09/11 12:27pm 第 1 次编辑]

可以

jasonf

能否详细说明，或给一个可以查询的资料
再三感谢

redboy

哦，你搞定了？

下面引用由qazxsw在 2003/09/04 05:21pm 发表的内容：
可以

cfluid

不要吹牛，要真才实学

qazxsw

呵呵，吹牛
fine手册14-5节

redboy

qazxsw是个比较踏实的同志。
欢迎多现身讲法！

qazxsw

FINE 14-15
14-5.3.2 How to Launch EURANUS in Sequential under Windows
1. Create Script File "*.bat". An example of "*.bat" file for a series of computations on Windows:
C:\NUMECA_SOFTWARE\fine53\bin\euranus.exe \\
C:\users\project\project_computation_1\project_computation_1.run -seq
C:\NUMECA_SOFTWARE\fine53\bin\euranus.exe \\
C:\users\project\project_computation_3\project_computation_3.run -seq
The Task Manager Task Management Using Scripts
C:\NUMECA_SOFTWARE\fine53\bin\euranus.exe \\
C:\users\project\project_computation_2\project_computation_2.run -seq
The command line, to start the flow solver EURANUS, contains its full path name, the full path
name of the *.run file to launch and the sequential mode selection:
INSTALLATION_DIRECTORY\fine53\bin\euranus.exe \\
COMPUTATION_PATH\project_computation_1.run -seq
2. Set Permission for Execution ".bat"
3. Create an input file (.run) for each computation. To create those files through the FINE™ interface,
click on the Project/Save Run Files menu in order to save the *.run file of the activated
computation, after opening the corresponding project.
4. Launch the script "*.bat" by typing the script file name: "*.bat" in a shell or double click on the
"*.bat" file from the Windows Explorer.

jasonf

非常感谢！
已经在我的机子上运行通过了。
核心语句：
INSTALLATION_DIRECTORY\fine53\bin\euranus.exe \\
COMPUTATION_PATH\project.run -seq
关键就是“-seq”这个参数形式啊。
再次感谢qazxsw