[讨论]About ANSYS IECM CFD5安装需用ANSYS workbench8.1 service pack 1

puguangyi

各位大虾：我安装了ANSYS IECM CFD5后,为using the “advanced Mesher”in ansys workbench 必需有ANSYS workbench8.1 service pack 1，where can I download ANSYS workbench8.1 的SP1.
   不过ANSYS IECM CFD5功能太强大了，它包括先全我所用的ANSYS  ICEMCFD4CFX，AI Environment2.0,ANSYS IECM CFD4.3.1,AI Ba tchsurf2.0.1等所有功能还要多。我现在十分渴望能下载到ANSYS workbench8.1 service pack 1，望知情人告之。
    Thanks in advance!!!

yonzhe

到清华大学的建筑系的ftp上可以下

puguangyi

     楼上能告诉我清华大学的建筑系的ftp的地址及用户名和密码吗?Thanks in advance!!!
         puguangyi@163.com         

joli

好像不需要，只要有个ICEMcfd的License就可以了，安装以后，把crack中的icemcfd的文件名改为license，将host ID改为你自己的主机名，然后copy到C:\Ansys\v81\icemcfd\5.0-win\lic directory目录下。
Ansys ICEM CFD 5.0 *CRACK FIX*
Note: ICEM CFD 5.0 is available with two GUI's. The old GUI does require
      ICEM CFD licensing while the new interface uses Ansys Licensing. You
      may use both licenses simultaneously which require 2 licenses.
1. Run setup and install ICEM CFD. Set the designation folder so there is no spaces
   in the path. Select to install all products. Chose a typical installations then
   select the additional Meshers and Vertical Applications.
2. At the end of the installation select to install the Ansys Licensing software.
   (Do not install the ICEM CFD Licensing software) When prompted point the browser
   to ansys.dat.
3. Copy the license.dat to: e.g. C:\Ansys\v81\icemcfd\5.0-win\lic directory.
   
4. Set the license environment:
   ANSYSLMD_LICENSE_FILE = 1055@host  (Host being your computer name)
   ICEM_LICENSE_FILE = C:\Ansys\v81\icemcfd\5.0-win\lic\license.dat  (Your installed path)
   
5. Reboot and run the program.
/team cax 2004

songke21

你们的icem cfd 5 是哪里下载的，我下载的里面没有crack,谁能给我发一个crack,谢谢。 songke21@yahoo.com.cn

jianggf

在那里可下载ICEM CFX 啊,请朋友们告诉我,谢谢,Email:gfjiang@sina.com