找回密码
 注册
查看: 818|回复: 3

柱塞泵仿真算两步就发散了

[复制链接]
发表于 2023-5-24 19:46:55 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?注册

x
本帖最后由 794577946 于 2023-5-25 16:01 编辑

貌似回流严重,但是出口管道已经加到管子直径的20倍了    用k-omiga算的  网格检查如图求大佬给点建议

                               
登录/注册后可看大图
 楼主| 发表于 2023-5-24 19:53:27 | 显示全部楼层
怎么图片发上不来...
 楼主| 发表于 2023-5-24 20:09:25 | 显示全部楼层
 楼主| 发表于 2023-5-24 20:11:44 | 显示全部楼层
Artificial walls on 1 face (0.0% area) of pressure-outlet 99 to prevent fluid from flowing into the boundary.

Artificial walls on 2040 faces (90.4% area) of pressure-outlet 113 to prevent fluid from flowing into the boundary.

Artificial walls on 1642 faces (72.8% area) of pressure-outlet 114 to prevent fluid from flowing into the boundary.

Artificial walls on 780 faces (100.0% area) of pressure-outlet 138 to prevent fluid from flowing into the boundary.
图上不来 内容是这样的
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表