求教关于pressure-outlet、inlet的出错信息

cfdist

在出口和入口分别设置pressure-outlet和pressure-inlet后，导入fluent的grid check出现如下出错信息，不知何故，请高手指教。
Checking boundary types:
Error: pressure-outlet zone 3 has two adjacent cell zones.
Error: pressure-inlet zone 4 has two adjacent cell zones.
Checking face pairs.
Checking periodic boundaries.
Checking node count.
Checking nosolve cell count.
Checking nosolve face count.
Checking face children.
Checking cell children.
Checking storage.
Done.
WARNING: Grid check failed.

tanxjzm

是在界面处网格划分出了问题，通常是和GAMIT对几何模型和网格要求的拓扑结构不一致造成。

josstone

最好在GAMBIT里面检查一下网格，无误之后再导入进去，省着出乱子