<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>流体中文网 - STAR CCM+论坛</title>
    <link>http://www.cfluid.com/forum.php?mod=forumdisplay&amp;fid=13</link>
    <description>Latest 20 threads of STAR CCM+论坛</description>
    <copyright>Copyright(C) 流体中文网</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 14 Apr 2026 12:13:35 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.cfluid.com/static/image/common/logo_88_31.gif</url>
      <title>流体中文网</title>
      <link>http://www.cfluid.com/</link>
    </image>
    <item>
      <title>求助：周期边界条件下的动网格怎么实现周期性运动</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215392</link>
      <description><![CDATA[我需要实现圆柱在计算域内运动，从一个边运动出去的同时从另一边再运动进来一个圆柱，整体运动是匀速、周期性的。现在了解到需要边界设置为周期性边界，但是starccm+内怎么设置这个边界、圆柱适配什么样的网格（重叠网格、动网格or滑移网格）可以让圆柱实现这样的重复运 ...]]></description>
      <category>STAR CCM+论坛</category>
      <author>Zsy</author>
      <pubDate>Sun, 12 Apr 2026 05:37:24 +0000</pubDate>
    </item>
    <item>
      <title>starccm+数值伪影求助</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215390</link>
      <description><![CDATA[为什么starccm+计算带螺旋桨的水下航行器，阻力推力，以及螺旋桨直发声都会有一定频率分量及倍频地方有峰值，比如说541hz及其倍频处，我个人感觉是数值伪影，但不知道出现在什么地方]]></description>
      <category>STAR CCM+论坛</category>
      <author>Thespian</author>
      <pubDate>Thu, 02 Apr 2026 13:38:27 +0000</pubDate>
    </item>
    <item>
      <title>vof相关问题</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215373</link>
      <description><![CDATA[使用vof生成的气泡，能够精准追踪某一个气泡吗？]]></description>
      <category>STAR CCM+论坛</category>
      <author>2427821469</author>
      <pubDate>Fri, 09 Jan 2026 11:24:25 +0000</pubDate>
    </item>
    <item>
      <title>求助：star-ccm+脉动压力计算的后处理</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215309</link>
      <description><![CDATA[求助各位大佬，我进行螺旋桨脉动压力计算后，得到了探测点处压力的周期性数据，请问如何在star-ccm+中将这些时域信号转为频域信号，该如何设置？]]></description>
      <category>STAR CCM+论坛</category>
      <author>1728589482</author>
      <pubDate>Fri, 04 Jul 2025 07:30:12 +0000</pubDate>
    </item>
    <item>
      <title>风噪仿真求助</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215294</link>
      <description><![CDATA[课题需要计算麦克风在不同的结构中受风的影响产生的风噪大小，请问如何用comsol或者STAR CCM+实现？请教各位大神！感兴趣的大神可邮件联系

，若能解决我们愿意支付相关技术服务费，拜谢！]]></description>
      <category>STAR CCM+论坛</category>
      <author>Dr.Peanut</author>
      <pubDate>Wed, 28 May 2025 01:27:34 +0000</pubDate>
    </item>
    <item>
      <title>氢氧混合燃气流</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215271</link>
      <description><![CDATA[有无佬做氢氧混合燃烧的，有无资料]]></description>
      <category>STAR CCM+论坛</category>
      <author>honor</author>
      <pubDate>Sun, 09 Mar 2025 12:17:08 +0000</pubDate>
    </item>
    <item>
      <title>请问一下starccm悬链线如何实现添加配重</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215246</link>
      <description><![CDATA[请问一下各位老师！我想给悬链线中间某一位置加一个配重块，请问可以怎么实现？
大概了解到starccm是不支持直接设置的。目前我的想法是，自己再画一个小立方体，然后把悬链线拆成两根分别接在立方体，立方体也设置成DFBI 6DOF，不知道可不可行？]]></description>
      <category>STAR CCM+论坛</category>
      <author>shwenq5451</author>
      <pubDate>Sun, 12 Jan 2025 10:10:20 +0000</pubDate>
    </item>
    <item>
      <title>starccm+重叠网格求助</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215218</link>
      <description><![CDATA[starccm+对重叠网格的设置有什么要求吗？最近在做物体被动运动的DFBI仿真，网格画好后，初始化求解时看到有大面积的空白

这个是压力云图的场景，有时候是初始化后出现大面积空白，有时候是仿真运行时出现
求各位大佬解惑！！！]]></description>
      <category>STAR CCM+论坛</category>
      <author>hdwxjtu</author>
      <pubDate>Thu, 05 Dec 2024 03:14:37 +0000</pubDate>
    </item>
    <item>
      <title>场函数的创建</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215185</link>
      <description><![CDATA[请问大佬们如何创建一个方向上的平均体积分数的场函数]]></description>
      <category>STAR CCM+论坛</category>
      <author>2427821469</author>
      <pubDate>Mon, 28 Oct 2024 11:58:24 +0000</pubDate>
    </item>
    <item>
      <title>求Starccm+的相关书籍·</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215143</link>
      <description><![CDATA[求Starccm+的相关书籍]]></description>
      <category>STAR CCM+论坛</category>
      <author>wxb007</author>
      <pubDate>Sun, 28 Jul 2024 13:28:36 +0000</pubDate>
    </item>
    <item>
      <title>标量属性问题</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215142</link>
      <description><![CDATA[请问标量属性设置中的转换，identity转换成symp的时候出现“identity does not exist in manager”是什么原因？]]></description>
      <category>STAR CCM+论坛</category>
      <author>tarcy52</author>
      <pubDate>Tue, 23 Jul 2024 01:35:00 +0000</pubDate>
    </item>
    <item>
      <title>大涡模拟的时均流场</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215123</link>
      <description><![CDATA[各位大佬，最近在看文献的时候经常会出现大涡模拟的时均流场，如果用star ccm+的话如何得到呢]]></description>
      <category>STAR CCM+论坛</category>
      <author>vettle</author>
      <pubDate>Sun, 02 Jun 2024 08:39:21 +0000</pubDate>
    </item>
    <item>
      <title>star-ccm+固体应力和DEM模型问题</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215117</link>
      <description><![CDATA[项目内容是想得到内部含有液体通道的悬臂梁固有频率，液体中含有固体颗粒。

固体域需要使用固体应力模型来求解悬臂梁振动情况，给固体“固体位移”指定。当给流体域“变形”指定时，无法激活“DEM”模型；当给流体域“stationary”指定时，可以激活“DEM”模型，但此 ...]]></description>
      <category>STAR CCM+论坛</category>
      <author>好好先森xc</author>
      <pubDate>Fri, 24 May 2024 14:56:37 +0000</pubDate>
    </item>
    <item>
      <title>如何添加自定义曳力模型</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215107</link>
      <description><![CDATA[大家好，请教大佬们一个问题，大家有知道怎么在STAR CCM+软件中加自己编写的曳力模型吗？]]></description>
      <category>STAR CCM+论坛</category>
      <author>谢磊</author>
      <pubDate>Thu, 16 May 2024 07:06:01 +0000</pubDate>
    </item>
    <item>
      <title>Ahmed模型仿真问题</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215080</link>
      <description><![CDATA[请教各位大佬，我在用star ccm+对Ahmed模型进行仿真，用的sst k-w模型，速度是60m/s,现在y+值全部在1左右，为什么还是算不准呢？跟Ahmed本人做的实验误差在3%左右，想更精确一些。]]></description>
      <category>STAR CCM+论坛</category>
      <author>vettle</author>
      <pubDate>Sat, 30 Mar 2024 07:07:28 +0000</pubDate>
    </item>
    <item>
      <title>场景&gt;性质&gt;转换，转换不能成功</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215037</link>
      <description><![CDATA[像大佬们请教，这个想要把原来的一半试图通过对称达到完成表现，却老是出现这个错误是啥原因。]]></description>
      <category>STAR CCM+论坛</category>
      <author>香料123</author>
      <pubDate>Thu, 04 Jan 2024 13:27:57 +0000</pubDate>
    </item>
    <item>
      <title>旋转机械交界面创建</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=215008</link>
      <description><![CDATA[想请教各位大佬一下，如何创建一个旋转机械的交界面。  就是该筒体旋转到一定位置后，筒体和射孔之间建立联系，此时流体进入射孔。]]></description>
      <category>STAR CCM+论坛</category>
      <author>KKang</author>
      <pubDate>Sun, 10 Dec 2023 10:47:54 +0000</pubDate>
    </item>
    <item>
      <title>求解历史</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=214994</link>
      <description><![CDATA[用star模拟波浪砰击半潜式结构，如何设置求解历史，一直是报错，能运行动画，但是看不到动画。]]></description>
      <category>STAR CCM+论坛</category>
      <author>姜雯</author>
      <pubDate>Thu, 30 Nov 2023 02:04:46 +0000</pubDate>
    </item>
    <item>
      <title>软件使用问题，如何查看网格的处理计算时间</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=214990</link>
      <description><![CDATA[请问怎么查看网格划分的计算时间、还有最后报告结果的计算时间呀？
意思就是，我想看划分网格和最后分析的耗时。

球球大佬带带]]></description>
      <category>STAR CCM+论坛</category>
      <author>z1a90</author>
      <pubDate>Sun, 26 Nov 2023 07:14:03 +0000</pubDate>
    </item>
    <item>
      <title>在star ccm+中导入icem网格后，在添加表面段设置时表面选项里没有任何表面可选怎么...</title>
      <link>http://www.cfluid.com/forum.php?mod=viewthread&amp;tid=214961</link>
      <description><![CDATA[]]></description>
      <category>STAR CCM+论坛</category>
      <author>林枫乐</author>
      <pubDate>Fri, 03 Nov 2023 11:14:37 +0000</pubDate>
    </item>
  </channel>
</rss>