CFX多级压气机仿真遇到问题
本帖最后由 obpawn 于 2023-12-10 11:15 编辑请教一下各位，在CFX中仿真多级压气机，每一级是动叶+静叶的组合，一级一级载入测试，当加载到第七级（14个叶片）的时候，出现了“Cannot write terminator to out file: Permission denied”的错误，然后跳出来的报错信息是：The ANSYS CFX solver exited with return code 1. No results file has been created.
前面几级都是正常的，是有模型数量的限制吗？请问有谁知道原因吗？谢谢。
OUTER LOOP ITERATION =688 ( 8) CPU SECONDS = 2.617E+05 (7.083E+03)
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res |Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.64 | 1.0E-03 | 2.8E-01 | 6.8E-02OK|
| V-Mom | 0.83 | 7.2E-04 | 1.2E-01 | 1.0E-01ok|
| W-Mom | 0.66 | 1.4E-03 | 2.1E-01 | 1.4E-01ok|
| P-Mass | 1.36 | 3.1E-04 | 9.6E-02 |9.25.9E-02OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| ERROR #004100018 has occurred in subroutine FINMES. |
| Message: |
| Fatal overflow in linear solver.
你好，问题解决了吗
页:
[1]